|
PRO 3 SERIES |
Call 702.400.3460 |
$13,950.00 |
|
Specifications |
Inch | mm |
|
Overall Size |
22.0" x 22.0" x 23.0" |
560 x 560 x550mm |
|
Table Size |
6.0" x 14.0" |
133 x 355mm |
|
X, Y, Z Axis Travel |
12.0" x 9.0" x 9.0" |
300 x 200 x 200mm |
|
Feed Rates |
.1 to 150 ipm linear .1 to 50 ipm 3-axis simultaneous |
|
|
Stepper Motors |
200 steps per revolution in full step mode, rated at 250 oz. in. |
|
|
Drivers |
Standard Step Modes: Micro stepping modes up to 12,800 steps per revolution (1 step, 1/2 step, 1/4 step, 1/8 step, and 1/64 stepping modes) |
|
|
Resolution Modes |
Standard: .0005" full step, .00025 half step Micro Stepping Modes: .000125" 1/4step, .0000625" 1/8 step, .0000078125" in 1/64 step |
|
|
Table Mechanism |
Dual linear ball bearing slides on each axis, sealed. THK(tm) linear slides - RS15 series |
|
|
Drive Mechanism |
THKtm Ball Screw actuator - preloaded and sealed, 5mm pitch |
|
|
Hold Down Type |
Table top 1/4"-20 mounting holes, 1" centers |
|
|
Spindle System |
NSK Compact size, light weight and high output Power, Brush-less motor, Excellent durability by air-cooling system, Motor withstands, 5,000 hours of continuous use |
|
|
Spindle Speeds |
Variable 2000 to 25,000 rpm, user select / computer controlled spindle on/off |
|
|
Spindle Rotation |
Spindle manually rotates 90 degrees in both directions |
|
|
Tool Chuck |
Collets |
|
|
Machine Weight |
100 lbs. |
45 Kg |
|
Electronics |
|
|
PC Interface |
Serial, RS-232, com1, com2, or com3 |
|
Drive Type |
Bi-polar chopper, 3.5 amp with micro-stepping settings |
|
Number of drives |
3, with 3-axis simultaneous control (optional 4th axis) |
|
Power Input |
110 VAC (220 VAC), converts to 40 VDC |
| Memory Type | non volatile memory, needs use of computer to run part programs and control machine |
|
Interface |
TTL signal from serial port (RS-232). All cables supplied |
| Input Logic | Up to 8 input TTL signals |
|
Output Logic |
Up to 8 output for limit, home, or safety switches. |
|
|